Noswitch2provision

Asforthestack,youshouldbeabletonoprovisionswitch2nowthatitisrenumberedtoswitch1.0Helpful.,TheProvisionedstatemightbecausedbyaswitchthatisnolongerconnectedtothestackorbetheresultofmanuallypre-provisioningtherelatedports.See ...,2022年1月11日—1.Removepower/stackcablesfromswitchbeingremoved·2.Runnoswitch#provision·3.Copyrunstart·4.Rebootstack.,Poweroffthenewstackmembertoberemoved.·RemovetheStackW...

參考資訊如下
Resetting Switch 2 of a former 3850 Stack

As for the stack, you should be able to no provision switch 2 now that it is renumbered to switch 1. 0 Helpful.

Solved

The Provisioned state might be caused by a switch that is no longer connected to the stack or be the result of manually pre-provisioning the related ports. See ...

Removing switches from 3850 stack

2022年1月11日 — 1. Remove power/stack cables from switch being removed · 2. Run no switch # provision · 3. Copy run start · 4. Reboot stack.

remove cat 9300 from stack

Power off the new stack member to be removed. · Remove the StackWise cable from the switch. · Issue the command no switch stack-member-number provision command.

Removing and Adding Switches to a Switch Stack with No ...

1) on existing stack - switch xxx provision (type of switch your adding) · 2) on new switch change switch priority to a value higher then the existing master ...

Solved: Stack Config

2022年3月28日 — What I am wondering is, where does the provision command apply? Master or the new switch i am going to add? What are the effects of adding or ...

provision command

2020年2月16日 — Now if you want to remove the switch from the stack, you disconnect it and do a. no switch 2 provision ws-c3750-24ts. This will remove the ...

Remove switch provisioning from individual switches

2017年9月27日 — You need to un-provision the removed switch(es) and renumber the current one to be the 1st switch. Your two switches are now standalone ...

Cisco Switch 取消堆疊步驟

2016年1月17日 — 指令： Switch 2 remember 1 ，詢問是否要變更，選 Y. 2. 重新啓動（必需做 ... 3. 刪除 Switch2 所有的配置. 指令：Switch(config)# no switch 2 provision.

建立和管理Catalyst 3750交換器堆疊

2022年12月8日 — 若要刪除與已移除的交換器（已離開堆疊的堆疊成員）相關聯的所有組態資訊，請在全域組態模式下套用no switch provision 指令。 在本範例中，從堆疊中移除 ...